Sleeve-It System

When Your Wall Needs a Fence

The Sleeve-It® System is a patented, code compliant, fence-post anchoring system that integrates stable fence footings into the support structure of walls while the retaining wall is being constructed. This unique fence system is pre-engineered and pre-designed so that the useable real estate at the top of a retaining wall is not wasted.

Using the system as part of the Segmental Retaining Wall (SRW) eliminates a 3 foot offset requirement for rails and fences that are added after wall construction, reducing specifier liability and associated costs with building-code compliance. Sleeve-It also offers a below grade engineered design that provides superior safety in a cost effective solution.

Fence Foundation Sleeve-It System Details

Sleeve-it system components:

  1. Front sleeve half
  2. Rear sleeve half
  3. PVC coated struts (2)
  4. PVC coated cantilever base
  5. Lid
How Sleeve-It Works

How Sleeve-It Works

The face of a Segmental Retaining Wall consists of dry stacked, mortarless concrete units. These units cannot resist an overturning moment generated when a load is applied to a fence post. The Sleeve-It System uses a traditional cantilever design to engage the overlying soil mass, thereby providing resistance to the fence load.

How to Install Sleeve-It

Simple Construction:

1: Install the cantilevered Sleeve-It units near the elevation of the top of the wall

2: Fill and compact soil to the top of the sleeve

3: Leave the disposable lid on the sleeve until the fence installer places the fence post in the sleeve and fills with concrete

4: The fencing contractor finished the fence, supported by the buried Sleeve-It System